The report on turning movements on intersections, generated in module 6.11, "List auto times and volumes", lists the results on an intersection by intersection basis in the form of tabulated matrices. While this format is very readable for the human eye, it is extremely difficult to use the data formatted in this way as input to other procedures. This holds true especially in those applications in which it is necessary to feed the turning movement resulting from the assignment of one scenario into the user data field of the turns in another scenario (where they will be used as additional volumes on turns). In order to facilitate this type of transfer, a new in-line report format is now offered in addition to the tabulated report. On each line it lists the data related to one turning movement. The lay-out closely resembles to the batch file format of module 2.31, so if needed, the report file can easily be transformed into a batch input file. Here is an example of the new in-line format:
EMME/2 Module: 6.11 Date: 89 02 10 User: E001/SPIESS.....HS Page: 44
Project: EMME/2 STANDARD DEMONSTRATION AND TEST DATA BASE
Scenario 1000: WINNIPEG 1981 ROAD AND TRANSIT NETWORK
-------------------------------------------------------------------------------------------
AUTO VOLUMES AND TIMES ON TURNS
*******************************
at from to penalty time -------volumes--------
node node node code (min) auto add. total
423 415 422 - .00 0 0 0
423 415 424 - .00 97 0 97
423 415 436 - .00 901 37 938
423 415 502 - .00 124 0 124
423 422 415 0
423 422 424 - .00 134 25 158
423 422 436 - .00 815 40 855
423 422 502 - .00 55 38 92
423 424 415 - .00 397 0 397
423 424 422 - .00 793 25 818
423 424 436 1 .50 26 0 26
423 424 502 1 .50 84 0 84
423 436 415 - .00 1655 77 1732
423 436 422 - .00 656 0 656
423 436 424 - .00 29 0 29
423 436 502 1 .50 17 0 17
423 502 415 - .00 441 0 441
423 502 422 - .00 58 38 96
423 502 424 1 .50 51 0 51
423 502 436 - .00 49 0 49